It’s been almost two years since I harped on this stuff. Found out I’m getting visits to the old post still, so I figured it’s time for a quick update. Did a little looking around on Google and the results turned up the following:
Here’s some manuals I found at http://attrition.org/misc/ee/atm_manuals/:
07103-00013C (FT5KUsrMan(3.0))file Tranax Mb Operator Manual MakoOps(4.1) 07102-00047 (RT2KUsrMan) 98XXman(2.5) 07100-00008F (9100UsrMan(5.0)) 07100-00018B (RL5KUsrMan(2.0)) 07100-00055 (8100 manual) 07102-00042B (97XXOpsMan(2.0))
And a fun cheat sheet for other default passwords that have been made available on the Internet.
| Company | Model | ACCESSING THE MANAGEMENT FUNCTIONS MENU | Master Password | ID Code | Admin Password | ||
| Diebold | CSP 200 | 1. With the terminal in the in-service mode, press the terminal maintenance switch. The Out of Service Password screen displays.2. Enter the password (the default password is 626243). An asterisk appears on the screen for each character entered.
3. Once the password is entered, Select ENTER or press the Enter key on the numeric keypad. The Manage Passwords screen displays. |
626243 | ||||
| Hyosung | NH5050 | 1. Press the ENTER, CLEAR, and CANCEL keys at the same time; then enter 1, 2, 3 in order.2. Enter your password and press ENTER. | |||||
| Hyosung | MB1500 | Press theCANCEL, CLEAR, ENTER key simultaneously
and then press 1, 2, 3 keys in order. |
Operator Password is “159951”..Master Password is “375876”..
Service Password is “965733”. |
||||
| Hyosung | MB1800 | Press theCANCEL, CLEAR, ENTER key simultaneously
and then press 1, 2, 3 keys in order. |
Operator Password is “111111”..Master Password is “555555”..
Service Password is “222222”. |
Thefactory default RMS Password is “111111”. | |||
| Hyosung | MB2100T | 1) Change to supervisor mode by pressinghighlighted switch. (upper right corner) | Operator Password is “222222”.Master Password is “555555”.
Service Password is “111111”. |
Thefactory default RMS Password is “333333”. | |||
| Hyosung | NH-1800CE | To enter Supervisor mode press the ENTER, CLEAR, CANCEL, 1, 2 and 3 keys in order. | OPERATOR111111 (6 digits)
SERVICE 222222 (6 digits) MASTER 555555 (6 digits) |
||||
| Mandrake | ecash2000 | Press the CANCEL, CLEAR, ENTER key simultaneously and then press 1,2,3 keys in order. | 159951 | ||||
| NCR | 7401 | terminal reboot | password (in manual example) | ||||
| Tranax | 1700 | To access the Operator Function menu, press the following keys in order <Enter>, then <Clear>, then <Cancel> then 1, then 2, then 3. | 000000 | 000000 | |||
| Tranax | 1500 | To access the Operator Function menu, hold the <Cancel>, <Clear> and <Enter>keys simultaneously for 2 seconds, release them and press 1, then press 2, then
press 3. The timing of this procedure can be difficult at first. |
555555 | 222222 | |||
| Triton | 98xx | 1. Press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. After a moment the Top Menu will be displayed.2. At the Top Menu select the management area by pressing the F7 Screen Key (next to the MANAGEMENT FUNCTIONS option). | 001234 | 00 | |||
| Triton | 9100 | 1. At the Customer Welcome screen, press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. After a moment the Top menu screen will be displayed.2. The Top menu allows you to choose one of two options, CUSTOMER TRANSACTIONS or MANAGEMENT FUNCTIONS. Select MANAGEMENT FUNCTIONS. The password entry screen appears.
3. Enter the Master or Administrative password and press the <ENTER> key. The MANAGEMENT FUNCTIONS main menu screen appears. |
123456 | 987654 | |||
| Triton | RL5000 | 1. At the Customer screen , press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. The password entry prompt appears.2. At the password entry screen, enter the Master or Users password. | 001234 | 00 | |||
| Triton | 8100 | 1. Press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. After a moment the top menu will be displayed.2. At the top menu, select MANAGEMENT FUNCTIONS by pressing the key next to Management Functions option.
3. Enter the user password at the password entry display. |
123456 | 987654 | |||
| Triton | 97xx | 1. If the Customer Welcome screen is being displayed, press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. After a moment the Top Menu screen will be displayed. Select the MANAGEMENT FUNCTIONS option.2. Reset the terminal by removing and reapplying power to the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.
3. Remove and then reapply power to the terminal using the ON/ OFF switch located on the right side of the card cage inside the upper enclosure of the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS. |
123456 | 987654 | |||
| Triton | RT2000 | 1. At the Customer screen , press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. The password entry prompt appears.2. At the password entry screen, enter the Master or Users password. | 001234 | 00 | |||
| Triton | FT5000 | 1. At the Customer screen , press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. The password entry prompt appears.2. At the password entry screen, enter the Master or Users password. | 001234 | 00 | |||
| Triton | 2000 | 1. If the Customer Welcome screen is being displayed, press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. After a moment the Top Menu screen will be displayed. Select the MANAGEMENT FUNCTIONS option.2. Reset the terminal by removing and reapplying power to the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS.
3. Remove and then reapply power to the terminal using the ON/ OFF switch located on the right side of the card cage inside the upper enclosure of the terminal. When the Top Menu is displayed select MANAGEMENT FUNCTIONS. |
123456 | 987654 | |||
| Triton | 9600 | 1. At the Customer screen , press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. The password entry prompt appears.2. At the password entry screen, enter the Master or Users password. | 123456 | 987654 | |||
| Triton | RL1600 | 1. At the Customer screen , press and hold down the <CTRL> key; while holding down the <CTRL> key, press the <1> key. Release both keys. The password entry prompt appears.2. At the password entry screen, enter the Master or Users password. | 123456 | 987654 | |||
| Triton | RL2000 | 1. Activate the terminal (terminal reboot) to perform customer transactions by pressing the key next to CUSTOMERTRANSACTIONS.
2. Enter the terminal system management area by pressing the key next to MANAGEMENT FUNCTIONS. Note: You will have to enter an appropriate password to view the Management Functions menu. |
The Master password must be changed from its default. | ||||
